Quill shim

In Karen Loomis’s PhD thesis (volume 3, p.379-380) she prints two photographs of a shim from tuning pin hole no.23 on the Queen Mary harp. One shows the shim extracted; it is made from a split section of a feather quill.

DSCF3965
This photo shows how pin no.29 was going into the neck far too far, because its hole was too big.

On my replica, pins 29 and 30 have needed shimming for some years now. I had originally tried paper, and subsequently sheet brass, but I was inspired by this discovery, to pull the pins and try quill shims.

Continue reading Quill shim